Original price was: £3,058.00.£2,140.60Current price is: £2,140.60. + VAT
Bring unrivaled power, structural control, and digital protection to elite perimeter lines with the Fadini COMBI 787 (K787.2L) Heavy-Duty Underground Double Gate Automation Kit (VIX 53 Edition). Engineered explicitly to handle the massive inertia of large close-boarded timber, ornate cast iron, or industrial steel double gates up to 6 meters wide per leaf (or up to 1,000kg for shorter spans), this kit represents the peak of heavy-duty subterranean automation.
The advanced K787.2L variant features integrated, adjustable hydraulic braking (slowdown) in both directions. This mechanism gently cushions the final phases of travel to eliminate gate slamming, protect structural hinges, and ensure near-silent mechanical operation. Upgraded with the cutting-edge VIX 53 uncopyable rolling-code radio matrix, this high-performance system delivers invisible, estate-grade aesthetic purity alongside uncompromising physical and digital boundary security.
Integrated Hydraulic Braking: Throttles internal fluid flow over the final phase of travel, providing premium soft-stop deceleration during both opening and closing cycles.
Upgraded VIX 53 Frequency Security: Replaces legacy radio systems with Fadini’s modern rolling-code encryption, delivering superior anti-cloning security and maximum range.
Massive 1,000kg Heavy-Duty Lifter: High-volume hydraulic cylinders provide immense output torque, purpose-built for high-inertia residential estate and commercial gates.
Irreversible Double Hydraulic Locking: Internal hydraulic valves securely lock the gate leaves in both the fully opened and closed positions, creating a rigid structural barrier against forced entry.
Automating solid-faced wooden gates or heavy steel security barriers introduces high structural risks: the extreme wind leverage and dead weight can cause wide gate spans to slam violently, damaging hinges and destabilizing pillar masonry. The Fadini COMBI 787 K787.2L system solves this problem mechanically. By combining an industrial-grade hydraulic pump with built-in bidirectional deceleration valves, it handles the dynamic momentum of substantial gate leaves, gliding them down into a whisper-quiet, controlled rest at either end of the travel cycle.
This premium edition completely isolates all mechanical components subterranean within heavy-gauge, 5mm thick galvanized steel foundation enclosures. To safeguard your digital access, the VIX 53 radio receiver modules integrate directly into the Elpro 27 control board. Every time a remote button is pressed, the encryption algorithms seamlessly change the transmitted digital code. This completely frustrates electronic interceptors or “code-grabbing” hardware used by modern thieves, locking down your perimeter with military-grade efficiency.
Completely Invisible Architecture: Keeps the pristine face of high-end timber or bespoke iron gates completely clean and clear of unsightly external arms or surface rams.
Adjustable Thrust By-Pass Valves: Built-in high and low-pressure by-pass valves allow installers to fine-tune physical thrust limits mechanically, meeting strict European safety requirements.
Reinforced Foundation Enclosures: Housed inside an ultra-thick, electrolytically galvanized steel foundation box designed to withstand permanent soil acidity and heavy vehicular tyre loads over the lid.
Heavy Pressed Manual Release: Includes robust emergency release assemblies with bespoke spanners, allowing easy manual disengagement of the hydraulic loop during complete power failures.
2x Fadini COMBI 787 Heavy-Duty Hydraulic Operators: (1x Left-Handed, 1x Right-Handed, 110° Rotation, Bidirectional Double Locking & Internal Slowdown Braking).
2x Zinc-Coated Ultra-Heavy Steel Enclosures: Protective foundational 5mm thick underground boxes with reinforced drive lids.
1x Elpro 27 Advanced Control Unit: Multi-functional, micro-processor logic command board.
1x VIX 53 Radio Receiver Module: Advanced, high-security plug-in rolling-code receiver card.
2x VIX 53 Rolling-Code Remote Transmitters: Modern, ergonomic multi-channel pocket fobs.
1x Tuned Radio Antenna / Aerial: Enhances remote command range across complex masonry walls.
1x Pair of Safety Photocells: Active infrared beams to actively prevent gate closure on crossing vehicles or pedestrians.
| System Attribute | Engineering Specification |
| Kit Model Code | K787.2L – VIX 53 Edition |
| Radio Control Matrix | Fadini VIX 53 Rolling-Code Protocol (868.19 MHz Encryption) |
| Power Input / Supply | 230V AC (50Hz) |
| Absorbed Power Consumption | 330 W (Uprated Industrial Motor) |
| Max Capacity Limits | Up to 6.0m leaf width / Maximum 1,000kg weight per leaf (See limits matrix) |
| Drive Rotation Angle | 110° Shaft Rotation |
| Slowing/Braking Zone | Integrated, adjustable hydraulic slowdown in both opening and closing cycles |
| Locking Mechanism | Irreversible Bidirectional Hydraulic Locking (Double Locking) |
| Output Torque Performance | 250 Nm to 400 Nm (High-Torque Output) |
| Environmental Ingress Rating | IP67 (Fully Submersible Dust & Waterproof Seal) |
| Hydraulic Fluid Medium | Genuine Fadini Fluid / 708L Oil |
| Duty Rating Frequency | Intensive / Continuous Commercial Duty Cycle |
Pro Tip: Due to the extraordinary power output of the Combi 787 hydraulic system, skipping the gate weight-to-width ratio assessment can cause severe damage to your gate hinges or the internal drive splines if the gate meets a solid obstruction.
The Structural Law: While the maximum raw lifting weight of the 787 jack is 1,000kg, this max capacity is strictly rated for gate spans up to 2.0 meters wide. For an extended 6.0-meter gate leaf, your maximum safe weight limit drops to 300kg per leaf to manage the massive rotational inertia. If you are fitting this kit to gates over 3.5 meters in width, you must install an external electric lock (such as a mechanical latch lock or maglock) to support the center joint against high-torque wind deflection.
You must be logged in to post a review.
Reviews
There are no reviews yet.